After several failures, i believe i finally have a config worthy enough to be posted here for your enjoyment.
// WaveShape Name: DD-Maelstrom
Aspc=1
Stps="100"
A0="pi*sgn(sin(t))"
A1=".7+rnd(.1)"
A2=".2+rnd(.1)"
B0="trwv(fft(s))*1.2"
B1="b0+t"
B2="pos(sin(a0*t)+1)/2*pi"
B3="cos(-2.5*t)"
B4="sin(-2.5*t)"
B5="t+2*pi*(ID/NUM)"
B6="sin(b5+b2)*b4"
B7="cos(b5+b2)*b3"
C0="sin(b2*s)"
C1="a1*s+a2"
C2=".25+cos((c0+b1)*1.2)*c1"
C3=".25+sin((c0+b1)*1.5)*c1"
C4="cos(b0)*c2-sin(b0)*c3"
C5="cos(b0)*c3+sin(b0)*c2"
X0="-b6*c4-b7*c5"
Y0="b6*c5-b7*c4"
X1="-b6*(-c4)-b7*(-c5)"
Y1="b6*c5-b7*c4"
X2="-b6*c5-b7*c4"
Y2="b6*(-c4)-b7*(-c5)"
X3="-b6*(-c5)-b7*(-c4)"
Y3="b6*c4-b7*c5"
ConB=0
LWdt="4-(s*4)"
Pen="1.2-s"
Meta="reactive=4 detail=4 density=3 morphable=4"
Vers=100
Another new waveshape
Moderators: BTT, andy55, b.dwall, juxtiphi
- JayPro
- Posts: 738
- Joined: Sat May 01, 2004 10:51 pm
- Location: Huntington Station, Long Island, New York
Who said any of them were failures??????
The only reason I haven't commented so far is that I've had so much fun watching your waves blend into the overall G-Force experience.
All these are simplistic, but in a very good way. Sometimes you might come across a waveshape that'll block your enjoyment of a flowfield or a colormap. These don't.
I'll be out most of the afternoon; so I'll trust others here will test this latest one of yours and I'll find out soon enough too.
The only reason I haven't commented so far is that I've had so much fun watching your waves blend into the overall G-Force experience.
All these are simplistic, but in a very good way. Sometimes you might come across a waveshape that'll block your enjoyment of a flowfield or a colormap. These don't.
I'll be out most of the afternoon; so I'll trust others here will test this latest one of yours and I'll find out soon enough too.
"God is syntax."
I say they are failures, by that i mean if i'm not satisfied with one i'm working on, i'll delete it, and start over with a new idea.
I test my waveshapes on a variety of flowfields and colormaps, just to be sure they work ok with most of them.
Thanks for your compliments, makes all the hard work worthwhile.
Dave
I test my waveshapes on a variety of flowfields and colormaps, just to be sure they work ok with most of them.
Thanks for your compliments, makes all the hard work worthwhile.
Dave