Assistance pls: Can't find FlowField Union activation.

Discussion forum for G-Force users

Moderators: BTT, andy55, b.dwall, juxtiphi

Post Reply
User avatar
JayPro
Posts: 738
Joined: Sat May 01, 2004 10:51 pm
Location: Huntington Station, Long Island, New York

Assistance pls: Can't find FlowField Union activation.

Post by JayPro »

I looked in Toolbar and the GUI in Standalone.

I did see a Union frequency time control in GUI but nothing else.
"God is syntax."

User avatar
BTT
Administrator
Posts: 2162
Joined: Sun Jun 20, 2010 9:34 pm
Location: United Kingdom

Post by BTT »

Hello JayPro

Go to Program Files\SoundSpectrum\G-Force\Packages you will find the FlowField Union configs in there.

Check the Preference file, make sure this entry is there:-

"FlowField Union.Slideshow.EnableOnStartup" = 1
.
Regards BTT

ColorMap Creator for G-Force and Aeon --- SoundSpectrum Forum Administrator.

User avatar
JayPro
Posts: 738
Joined: Sat May 01, 2004 10:51 pm
Location: Huntington Station, Long Island, New York

Post by JayPro »

They're set to the proper value; but am I not also supposed to see an "Activate Unions" control in the Toolbar and/or a similar option in the Standalone/iTunes builds?
I can't; and I've looked carefully. I've even run the standalone on auto to see, and still nothing.

I must still be overlooking something. :?:
"God is syntax."

User avatar
DanPin
Posts: 161
Joined: Tue Mar 15, 2016 8:43 pm
Location: Los Angeles County, California

Post by DanPin »

Are you in the flowfields page? If so, then you might not be able to set the Union interval because it is hidden.

User avatar
BTT
Administrator
Posts: 2162
Joined: Sun Jun 20, 2010 9:34 pm
Location: United Kingdom

Post by BTT »

Hello JayPro

I don't know the answer to your question, so suggest you contact Brandon by clicking on the link below:-

http://www.soundspectrum.com/support/contact.html
DanPin wrote:Are you in the flowfields page? If so, then you might not be able to set the Union interval because it is hidden.
OK - so where is it hidden? if you know share the info with us.
.
Regards BTT

ColorMap Creator for G-Force and Aeon --- SoundSpectrum Forum Administrator.

carl1011
Posts: 41
Joined: Tue Mar 24, 2015 3:56 pm

Post by carl1011 »

The FlowField Union Interval Clock is the method for activating the Flow Fields. Just set a time or Never.

I believe the error you are making is reading the documentation. It hasn't been updated in quite a while so some features may not be available or have changed.

Hope this helps.

Post Reply